Article image

Artikli nr: 7859300

Storatherm Heat Combi HC 800/1_C

Combined legionella-safe storage cylinder with foil jacket, silver, 3 bar

Tehnilised andmed

Type

HC 800/1_C

Colour

silver

Insulation type

foil jacket

Insulation strength

120 mm

Energy efficiency class

C

Nominal capacity

715 l

Rated content corrugated pipe

39 l

Number of sleeves

9 St.

Operating temperature

95 °C

Perm. operating temperature heat exchanger

110 °C

Max. perm. operating pressure

3 bar

Perm. operating pressure heat exchanger

3 bar

Perm. operating pressure corrugated pipe

6 bar

Operating pressure

3 bar

Connection

Rp 1 1/2"

Drinking water connection

Rp 1 1/4"

Connection heat surface(s)

R 1 1/4"

Connection cold/hot water

Rp 1 1/4"

Heat maintaining losses

132 W

Heating surface bottom

2.66 m²

Diameter

1028 mm

Height

1845 mm

Depth

990 mm

Tilt dimension approx.

1921 mm

Weight

131.00 kg

Toote üksikasjad

Storatherm Heat Combi
Combi cylinder for storage of heating and cooling water and for DHW heating using the instantaneous water heating principle. Optionally available in upright versions with one/two internal heat exchangers for connection of external energy sources. The inbuilt instantaneous water heater is designed as a stainless steel corrugated pipe. The heating return is routed into the tank via a viewing pipe. Two terminal strips enable the flexible attachment of temperature sensors.

Storage tank of steel S235JR+AR, inside uncoated and outside corrosion protected.

Buffer tank up to 1000 litre insulated with 100mm, buffer tank > 1000 litre with 120mm removable fleece insulation; according to DIN 4102-1 material class B2.Tank available in energy efficiency class C.

The heat losses are measured on an externally certified test bed.

Allalaadimised

Tarvikud

Contact the Reflex Team and further information

Reflex Solutions Pro

  • Free to use
  • Simple and self-explanatory
  • Detailed documentation
Reflex Solutions Pro

Reflex Solutions Pro allows you to design every Reflex and Sinus product into your project quickly and easily. After entering a few system parameters you will receive your custom product solution with all the relevant documentation.