:focal(1743x771:1744x772))
:focal(2030x752:2031x753))
)
:focal(1976x799:1977x800))
:focal(2178x616:2179x617))
:focal(1493x511:1494x512))
:focal(1889x1023:1890x1024))
:focal(1973x660:1974x661))
:focal(1426x934:1427x935))
:focal(1995x840:1996x841))
:focal(924x891:925x892))
:focal(1743x810:1744x811))
:focal(2044x818:2045x819))
Toote üksikasjad
Reflex G
Diaphragm expansion tank for sealed heating and cold water systems. The vessels are manufactured in accordance with DIN EN 13831, VDI 4708 and AD 2000. Approval according to Pressure Equipment Directive 2014/68/EC.
Diaphragm expansion tank for sealed heating and cold water systems. The vessels are manufactured in accordance with DIN EN 13831, VDI 4708 and AD 2000. Approval according to Pressure Equipment Directive 2014/68/EC.
- durable epoxy resin coating
- replaceable bladder according to DIN EN 13831
- for antifreeze additive of at least 25 – 50 %
- pressure gauge and supply pressure valve protected by clip
- upright configuration
- max. permissible system temperature 120°C
- max. permissible operating temperature 70°C
- connections:
→ up to 1,000 l / Ø 740 mm with threaded connections
→ from 1,000 l / Ø 1,000 mm with flange connections DN65/PN6 or DN65/PN16 - sleeve for optional membrane rupture detector
- with inspection opening (from 1,000 litres with Ø 1,000 mm)
Allalaadimised
Dokumendid
Joonised
BIM andmed
Toote fotod
Tarvikud
soovitatud
9119205 - AG connection set AG 1 1/4"
Connection group AG
For simple, professional assembly and maintenance of diaphragm-type pressure expansion vessels in heating, cooling water and water supply systems for non-drinking water.Consisting of a pipe connector with a flat gasket on the vessel connection screw fitting, a G 1/2" fill/drain ball valve and a cap ball valve with a secure shut-off in accordance with DIN EN 12828. Particularly suitable for upright MAG units with a flat gasket-sealing threaded nipple connection, e.g. Reflex N, G, S or Refix DE, DC.
For simple, professional assembly and maintenance of diaphragm-type pressure expansion vessels in heating, cooling water and water supply systems for non-drinking water.Consisting of a pipe connector with a flat gasket on the vessel connection screw fitting, a G 1/2" fill/drain ball valve and a cap ball valve with a secure shut-off in accordance with DIN EN 12828. Particularly suitable for upright MAG units with a flat gasket-sealing threaded nipple connection, e.g. Reflex N, G, S or Refix DE, DC.
valikuline
9119198 - Digital system pressure test device
Digital pressure gauge
Manual pressure gauge to check the gas pressure at the expansion vessel.With illuminated display. Display range up to 9.0 bar.
Manual pressure gauge to check the gas pressure at the expansion vessel.With illuminated display. Display range up to 9.0 bar.
valikuline
7857700 - diaphragm rupture detector MBM II
Membrane rupture detector
Electrode with evaluation relay for installation in an expansion vessel with an appropriate connection. Vessel must be pre-equipped for electrode (please note when ordering)
Electrode with evaluation relay for installation in an expansion vessel with an appropriate connection. Vessel must be pre-equipped for electrode (please note when ordering)
Inclusive of electrode relay for signal measurement for installation in installer-supplied control cabinet or for local installation.
- power supply 230 V/50 Hz
- floating output (changeover contact)
Contact the Reflex Team and further information
Reflex Solutions Pro
- Free to use
- Simple and self-explanatory
- Detailed documentation
:focal(2018x906:2019x907))
Reflex Solutions Pro allows you to design every Reflex and Sinus product into your project quickly and easily. After entering a few system parameters you will receive your custom product solution with all the relevant documentation.