:focal(2087x741:2088x742))
:focal(1743x771:1744x772))
:focal(2030x752:2031x753))
:focal(2016x687:2017x688))
)
:focal(1976x799:1977x800))
:focal(2178x616:2179x617))
:focal(1769x919:1770x920))
:focal(1794x960:1795x961))
:focal(1688x825:1689x826))
:focal(2211x774:2212x775))
:focal(2197x762:2198x763))
:focal(2012x887:2013x888))
:focal(2042x677:2043x678))
:focal(1964x703:1965x704))
:focal(2004x771:2005x772))
:focal(2129x802:2130x803))
:focal(1842x717:1843x718))
:focal(2252x541:2253x542))
:focal(2028x656:2029x657))
:focal(2216x805:2217x806))
:focal(1757x521:1758x522))
:focal(1995x840:1996x841))
:focal(1426x934:1427x935))
:focal(2162x651:2163x652))
:focal(1922x670:1923x671))
:focal(2171x571:2172x572))
:focal(1493x511:1494x512))
:focal(1878x762:1879x763) "Service Portal")
:focal(1908x623:1909x624))
:focal(1797x799:1798x800))
:focal(1029x706:1030x707))
:focal(1889x1023:1890x1024))
:focal(1973x660:1974x661))
:focal(1897x1028:1898x1029))
:focal(1899x1038:1900x1039))
:focal(1895x1017:1896x1018))
:focal(924x891:925x892))
:focal(2030x451:2031x452))
:focal(2098x769:2099x770))
:focal(2026x319:2027x320))
:focal(1743x810:1744x811))
:focal(1397x785:1398x786))
:focal(2044x818:2045x819))
:focal(1842x700:1843x701))
Product details
Buffer tank for storing heating and cooling water. Optionally available in upright versions with/without flange or with one/two internal heat exchangers for connection of external energy sources.
The connector series for heat sources and consumers are vertical, offset through 100° configured as charging or discharging connectors. Between these connector series there also vertically arranged screw-in options for sensor sleeves, thermometers or similar (3 x Rp 3/4, 1 x Rp 1/2). Tanks with bare-tube exchanges also have flow and return connectors to the tube bundle heating surface.
Storage tank of steel S235JR+AR, inside uncoated and outside corrosion protected.
The heat losses are measured on an externally certified test bed.Downloads
Documents
Drawings
BIM data
Product photos
Accessories
5418600 - fin-tube heat exchanger RWT 1
Auxiliary heat exchanger for installation in Storatherm Heat…/R heating water buffer cylinders, Storatherm AF and AB hot water storage tanks and Storatherm AF/2 and AB/2 solar cylinders of 300 to 500 litres.Installation takes place on site in the available service opening and enables the incorporation of a further heat source, e.g. a solar thermal system, thermal/district heat.Pipe material: Copper ribbed pipe
9118710 - EFHR 2.5
Electric immersion heater from for electric booster heating of Storatherm Heat H.../R and HF.../R heating water buffer cylinders and Storatherm Aqua hot water storage tanks-calorifiers with corresponding installation option via the inspection opening.
Temperature controller up to 85°C target value setting, safety temperature limiter at 110°C. Integrated terminal box. 3 power levels, reversible connections. Including flange and seal. Installation and electrical connection performed on site. Water hardness max. 14°dH, approved for continuous operation.
From 25 kW, the use of a control line is mandatory!
9116314 - EFHR 4.0
Electric immersion heater from for electric booster heating of Storatherm Heat H.../R and HF.../R heating water buffer cylinders and Storatherm Aqua hot water storage tanks-calorifiers with corresponding installation option via the inspection opening.
Temperature controller up to 85°C target value setting, safety temperature limiter at 110°C. Integrated terminal box. 3 power levels, reversible connections. Including flange and seal. Installation and electrical connection performed on site. Water hardness max. 14°dH, approved for continuous operation.
From 25 kW, the use of a control line is mandatory!
9116315 - EFHR 6.0
Electric immersion heater from for electric booster heating of Storatherm Heat H.../R and HF.../R heating water buffer cylinders and Storatherm Aqua hot water storage tanks-calorifiers with corresponding installation option via the inspection opening.
Temperature controller up to 85°C target value setting, safety temperature limiter at 110°C. Integrated terminal box. 3 power levels, reversible connections. Including flange and seal. Installation and electrical connection performed on site. Water hardness max. 14°dH, approved for continuous operation.
From 25 kW, the use of a control line is mandatory!
9116316 - EFHR 8.0
Electric immersion heater from for electric booster heating of Storatherm Heat H.../R and HF.../R heating water buffer cylinders and Storatherm Aqua hot water storage tanks-calorifiers with corresponding installation option via the inspection opening.
Temperature controller up to 85°C target value setting, safety temperature limiter at 110°C. Integrated terminal box. 3 power levels, reversible connections. Including flange and seal. Installation and electrical connection performed on site. Water hardness max. 14°dH, approved for continuous operation.
From 25 kW, the use of a control line is mandatory!
Contact the Reflex Team and further information
Reflex Solutions Pro
- Free to use
- Simple and self-explanatory
- Detailed documentation
:focal(1994x788:1995x789))
Reflex Solutions Pro allows you to design every Reflex and Sinus product into your project quickly and easily. After entering a few system parameters you will receive your custom product solution with all the relevant documentation.