Article image

Item no.: 8832000

Reflex Servitec S

self-optimising vacuum-spray tube degassing with make-up

Technical data



Max. system volume

6 m³

Max. system volume glycol

4 m³

max. perm. operating temperature

70 °C

max. perm. operating pressure

8 bar

operating pressure

0.5 - 4.5 bar

minimum inlet pressure makeup

0.10 bar

Max. sound pressure level

55 dB(A)

Electric connection


Pressure side connection

G 1/2"

Connection outflow side

G 1/2"

Make-up connection

G 1/2"

Separation level, dissolved gases to

90 %

Max. partial volume flow network

0.050 m³/h

Max. volume flow makeup

0.080 m³/h

Max. electrical rated power

0.20 kW


572 mm


340 mm


211 mm


13.80 kg

Product details

Reflex Servitec
Vacuum spray tube degassing for system and make-up water degassing in sealed heating and chilled water systems, configured as a fully automatic multi-function unit with “auto-start” function and automatic hydraulic compensation of the degassing process and monitoring of the make-up function.

Suitable for the media water and water/glycol mixtures up to a mixing ratio of 50/50%.

Functional unit comprising hydraulic part designed for wall mounting and electronic, ergonomically arranged Control Smart controller with CE marking.

Degassing takes place within the hydraulic part using a diaphragm pump in conjunction with a vertically arranged brass vacuum spray tube. This is equipped with a vacuum spray nozzle, dipstick-tube degassing unit and pressure monitoring. To protect it against dirt, the unit as a whole is located in a housing made from expanded polypropylene with an opening maintenance cover.

The Control Smart controller is integrated in a robust plastic housing in which both the power and communication electronics and the control panel with dirt-resistant plastic foil keyboard are housed. Bluetooth is integrated as standard as a communications interface. The controller has a fully automatic microprocessor controller with time function, differentiating error and parameter memory, LED display of the operating modes and general error messaging, visualisation of the control states for system pressure and all relevant operating and fault messages using the Control Smart App via Bluetooth communication.

Communication electronics comprising:

  • RS485 port (galvanically isolated) for the connection of optional communication components
  • Floating output for forwarding of the group message
  • Digital input for signal processing of a contact water meter
  • Analogue input for measuring the conductivity
  • Input for makeup functional request via external signal
Control Smart works with a plug & play function for independent system pressure detection, enabling convenient wireless operation via an app for smartphones and tablets running either iOS or Android to provide simple commissioning as well as visualisation of system operation. The following functions are available:
  • Automatic setting of the time and date
  • Setting and adjusting the minimum operating pressure p0
  • Switch-on times for permanent and interval degassing can be freely specified and entered by the operator
  • Free configuration of day of the week and time for interval degassing operating mode including a summer function
  • Status, warning and error display relating to facility pressure and operating conditions including diagnostic instructions and handling recommendations
  • Automatic software updates
Safety and function-relevant parameters are protected against unauthorised access.

Control unit completely assembled and wired ready for connection according to VDE regulations, mains power cable and mains plug, system connections by means of integrated shut-off valves.

Vacuum spray degassing of the content, filling and make-up water in self-optimising operation with cycles for continuous, interval and make-up degassing. Controlled make-up via reliable two-way motorised ball valve. Actuation takes place via an integrated system pressure interpretation unit or an external 230 V signal (e.g. a pressurisation station) with automatic interruption and fault messaging upon exceeding of the running time and/or the number of cycles. Alternatively, make-up can be performed from an open system separator vessel. Evaluation option provided by a contact water meter including optional possible capacity monitoring of ion exchangers in the make-up pipe. Documentation and control of the entire system in respect of the above mentioned parameters.


Contact the Reflex Team and further information

Reflex Solutions Pro

  • Free to use
  • Simple and self-explanatory
  • Detailed documentation
Reflex Solutions Pro

Reflex Solutions Pro allows you to design every Reflex and Sinus product into your project quickly and easily. After entering a few system parameters you will receive your custom product solution with all the relevant documentation.